|
Graphite cut gasket
First, the tectonic
 High-strength
metal dash board by the gasket and flexible graphite
composite particles and then by punching or cutting
from.
Second, the performance and
features
1,
applies to a wide range of operating conditions,
high temperature resistance, corrosion resistance,
resistance to radiation. Can use high-pressure area.
2,
in contact with the flange gasket surface and less
precision.
3,
the sealing performance.
4,
the lower gasket preload, and would not adhere to
the flange plane, easy to install, thus reducing the
labor intensity.
Third, the
use of
1,
temperature: -200-600
℃
2, using the pressure :6.4-10 .0 MPa
3,
the minimum sealing pressure ratio: y = 30MPa 4,
gasket coefficient: m = 2
Max Size: ~ 2100mm
Graphite
Cut
Gasket(graphite
gasket graphite pad) is increased from pure graphite
sheet and drilling or cutting board made of
graphite, it has good corrosion resistance, high /
low temperature, good compression resilient and high
strength .
Variety
of complex geometric circular gasket is widely used
in pipes, valves, pumps, pressure vessels, heat
exchangers, condensers, generators, air compressors,
exhaust pipes, refrigerator and so on.>>The
End
| 
